11 Best Cabinet Hardware Jig of 2026: Save Time and Get Accurate Holes

The Kreg KHI-Pull Jig brings the brand's hallmark accuracy to knob and small-pull installations with a movable edge guide and repeatable stops that eliminate measuring. Its metal-and-plastic construction stays rigid through dozens of holes, and setup is fast enough to cut install time in half when you're working on a full kitchen.

This jig is strictly for knobs and small pulls — it cannot handle long handles, hinges, or wide pulls. If your project involves varied hardware types, this jig's narrow focus becomes a limitation. It fits best for semi-pros and serious DIYers who need consistent results on identical hardware across many doors.

The Kreg Concealed Hinge Jig simplifies European hinge installation with consistent 35mm cup placement and a carbide bit that cuts cleanly. Adjustable offsets (3-6mm) handle door edge distances for repeatable results across multiple cabinets. Unlike Kreg's knob-and-pull jig, this is hinge-only, making it ideal for cabinet makers or DIYers tackling a full kitchen. The plastic guide can soften under continuous drilling — pausing between holes avoids deformation.

Hand-calibrated from 6061 aluminum, this jig delivers lab-grade precision that holds up to daily pro use. Laser-engraved rulers and shaker spacers make repeat setups fast – ideal for installers doing dozens of doors. The premium price (around $200) is a barrier for casual homeowners, but on large projects the time savings offset the cost quickly. Best suited for professional cabinet installers and serious DIYers with 50+ cabinets; occasional one-time users should look at simpler, cheaper options.

The TOURACE jig uses aluminum alloy guides that hold up better than plastic alternatives, with a quick-release drill block that snaps into preset positions. Laser-engraved scales and a storage bag round out a kit that manages 30–100 handle projects without flexing or wearing down. The catch: a minority of units can be off by around 1/16 inch, so testing on scrap before drilling cabinet fronts is a sensible precaution. That offset won’t matter for most DIYers, but anyone needing sub-millimeter repeatability should look at premium-priced all-metal jigs like the True Position.

This King&Charles jig comes with 3, 4, and 5mm point drill bits at a price lower than the top pick, making it the budget option for handle installation. Setup is straightforward thanks to dual-scale markings, and the storage bag keeps bits organized. It's best for DIYers who already have a center punch, as one isn't included. The plastic body keeps costs down but may flex under heavy drilling — something to consider for dense materials like oak.

Full kit with jig, auto punch, and three drill bits. Easy to use for small to medium DIY projects. Slightly higher price than the top pick, which omits bits but costs less - better for those with existing bits. Plastic body suited for light use, not heavy professional work.

This adjustable jig gets the job done for budget-minded DIYers who need a quick drilling guide for knobs and pulls. Setup is simple, and the ABS plastic body with metal bushings holds up fine for occasional use. The tradeoff: the sliding mechanism can shift during drilling, leading to alignment that's off by a few millimeters. If you're installing handles on a laundry room cabinet or a weekend project, it's a decent option. For kitchen cabinets where misaligned pulls would be obvious, consider the King&Charles jig with its integrated center punch instead.

This fixed template gets basic knob and pull drilling done on standard cabinets where slight misalignment is acceptable. It is very affordable and easy to use for one-off projects. Just know its three fixed centers (3, 3.75, 5 inches) cannot accommodate custom spacing, and alignment can vary — test on scrap first.

This jig holds the door in place while you attach hinges, making one-person installation possible and alignment quick. However, it is not designed for drilling hinge cups or hardware guides — it's purely a holding and positioning tool. The support arm can flex under heavier doors, which may shift alignment if you're not careful.

The SUNCONY jig offers all-aluminum construction and replaceable bushings at a mid-range price, making it a solid choice for those who want metal guides without paying for premium brands. However, some units may produce holes off by 1/8 inch, so testing on scrap before use is advised.